Pressure
Flow
Length
Area

Display only. Every formula on this site works in its own canonical unit, and the conversion happens where the number is written. The choice lives in this browser and in the address, with no account.

TOOLS

tmp maglev pumps

31 models in this family, 498 published parameters, each carrying the source key and the page it was read on.

Back to the selector, which answers across all 333 models and 14 families.

TMP-34033300 l/sN2 speed, down to 1.0e-9 mbarptb-shimadzu-tmp-3203-3403+19 parameters

Shimadzu, tmp maglev. Lifecycle: active.

ambient temp rangeOperation : 0 to 40 °C / Storage : -25 to 70 °C °Cptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

bake temp max120 °Cptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

bearing typemagnetic (radial + axial active maglev), touchdown backup bearingsptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 23.

compression h26 × 104ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

compression he1 × 105ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

compression n21 × 109ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

coolingwaterptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

inlet flangeVG350 (Note 4)ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

lubricantnone (dry, oil-free touchdown bearings)ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 23.

magnetic field maxRadial 3 mT / Axial 15 mT mTptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

mass70 kgptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

mounting orientationIn any desired direction (Note 3)ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

pumping speed h22400 l/sptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

pumping speed he3100 l/sptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

pumping speed n23300 l/sptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28. Served to the builder as 3300 l/s. Export rule: published nitrogen pumping speed.

rotation speed22020 rpmptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

service intervalAnnual overhaul is recommendedptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 53.

startup time15 minutes minptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

ultimate pressure10-7 Pa order Paptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

TMP-32033200 l/sN2 speed, down to 1.0e-11 mbarptb-shimadzu-tmp-3203-3403+19 parameters

Shimadzu, tmp maglev. Lifecycle: active.

ambient temp rangeOperation : 0 to 40 °C / Storage : -25 to 70 °C °Cptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

bake temp max120 °Cptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

bearing typemagnetic (radial + axial active maglev), touchdown backup bearingsptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 23.

compression h21 × 104ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

compression he3 × 105ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

compression n21 × 109 or moreptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

coolingair (cooling fan)ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

inlet flangeVG350 (Note 5)ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

lubricantnone (dry, oil-free touchdown bearings)ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 23.

magnetic field maxRadial 3 mT / Axial 15 mT mTptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

mass70 kgptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

mounting orientationIn any desired direction (Note 4)ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

pumping speed h22400 l/sptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

pumping speed he3000 l/sptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

pumping speed n23200 l/sptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27. Served to the builder as 3200 l/s. Export rule: published nitrogen pumping speed.

rotation speed21000 rpmptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

service intervalAnnual overhaul is recommendedptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 53.

startup time13 minutes minptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

ultimate pressure10-9 Pa order Paptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

TMP-3203LM3200 l/sN2 speedptb-shimadzu-tmp-3203-3403+1 parameter

Shimadzu, tmp maglev. Lifecycle: active.

pumping speed n23200 L/sptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403. Served to the builder as 3200 l/s. Export rule: published nitrogen pumping speed.

STP-A30033000 l/sN2 speed, down to 1.0e-8 mbart2-stp-a2503-a3003+19 parameters

Seiko Instruments Inc., tmp maglev. Lifecycle: eol supported.

ambient temp range0 to 40 °Ct2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

bake temp max<120 °Ct2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

bearing typemagnetict2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 9.

compression h26×10^3t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

compression n2>10^8t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

coolingWater coolingt2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

inlet flangeVG300/VG350/ISO320Ft2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

lubricantNot necessaryt2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

mass72 kgt2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

max foreline pressure333 (2.5)t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

max gas throughput n23.0 (1800)t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

mounting orientationFreet2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

noise level<50t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

pumping speed h21800 l/st2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

pumping speed n23000 l/st2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8. Served to the builder as 3000 l/s. Export rule: published nitrogen pumping speed.

purge flangeKF10t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 13.

rotation speed27000 rpmt2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

startup time9 mint2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

ultimate pressurerestated in a second unit, 1.333x apart10^-6 Pa (10^-8 Torr)t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

STP-A25032500 l/sN2 speed, down to 1.0e-8 mbart2-stp-a2503-a3003+19 parameters

Seiko Instruments Inc., tmp maglev. Lifecycle: eol supported.

ambient temp range0 to 40 °Ct2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

bake temp max<120 °Ct2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

bearing typemagnetict2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 9.

compression h26×10^3t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

compression n2>10^8t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

coolingWater coolingt2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

inlet flangeVG250/ISO250F/ICF305t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

lubricantNot necessaryt2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

mass72 kgt2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

max foreline pressure333 (2.5)t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

max gas throughput n23.0 (1800)t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

mounting orientationFreet2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

noise level<50t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

pumping speed h21600 l/st2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

pumping speed n22500 l/st2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8. Served to the builder as 2500 l/s. Export rule: published nitrogen pumping speed.

purge flangeKF10t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 13.

rotation speed27000 rpmt2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

startup time9 mint2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

ultimate pressurerestated in a second unit, 1.333x apart10^-6 Pa (10^-8 Torr)t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

STP-F2203C2200 l/sN2 speed, down to 1.0e-8 mbarptb-edwards-stp-f2203c+15 parameters

Edwards, tmp maglev. Lifecycle: active.

ambient temp range0 to 40 °Cptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

bake temp max< 120 °Cptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

bearing typemagnetic bearingptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

coolingWater coolingptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

lubricantNot necessaryptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

mass61 kgptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

max foreline pressure500 Paptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

mounting orientationFreeptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

noise level<50 dBptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

pumping speed h21200 L/sptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

pumping speed n22200 L/sptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8. Served to the builder as 2200 l/s. Export rule: published nitrogen pumping speed.

purge flange3.4×10-2 to 8.4×10-2 Pa·m3/sptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

rotation speed27000 rpmptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

startup time7 minptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

ultimate pressure10-6 Paptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

STP-A22032200 l/sN2 speedt2-stp-a2203+21 parameters

Seiko Instruments Inc., tmp maglev. Lifecycle: eol supported.

ambient temp range0 to 40 °Ct2-stp-a2203

Read on t2-stp-a2203 p. 107.

bake temp max<120 °Ct2-stp-a2203

Read on t2-stp-a2203 p. 107.

bearing typemagnetic bearings with solid-lubricated touch-down (backup) bearingst2-stp-a2203

Read on t2-stp-a2203 p. 21.

compression h22.5×10^4 ratiot2-stp-a2203

Read on t2-stp-a2203 p. 107.

compression n2>10^8 ratiot2-stp-a2203

Read on t2-stp-a2203 p. 107.

coolingWater coolingt2-stp-a2203

Read on t2-stp-a2203 p. 107.

inlet flangeVG250/ISO250F/ICF305t2-stp-a2203

Read on t2-stp-a2203 p. 107.

lubricantNot necessaryt2-stp-a2203

Read on t2-stp-a2203 p. 107.

magnetic field max15 mTt2-stp-a2203

Read on t2-stp-a2203 p. 27.

mass61 kgt2-stp-a2203

Read on t2-stp-a2203 p. 107.

max foreline pressure400 (3) Pa (Torr)t2-stp-a2203

Read on t2-stp-a2203 p. 107.

max gas throughput n22.5 (1500) Pa・m3/s (SCCM)t2-stp-a2203

Read on t2-stp-a2203 p. 107.

mounting orientationFreet2-stp-a2203

Read on t2-stp-a2203 p. 107.

noise level<50 dBt2-stp-a2203

Read on t2-stp-a2203 p. 107.

pumping speed h21700 L/st2-stp-a2203

Read on t2-stp-a2203 p. 107.

pumping speed n22200 L/st2-stp-a2203

Read on t2-stp-a2203 p. 107. Served to the builder as 2200 l/s. Export rule: published nitrogen pumping speed.

purge flangeKF10t2-stp-a2203

Read on t2-stp-a2203 p. 24.

rotation speed27,000 rpmt2-stp-a2203

Read on t2-stp-a2203 p. 107.

service intervalthree to six monthst2-stp-a2203

Read on t2-stp-a2203 p. 102.

startup time7 mint2-stp-a2203

Read on t2-stp-a2203 p. 107.

ultimate pressure10-６(10-８) order (after baking) Pa (Torr)t2-stp-a2203

Read on t2-stp-a2203 p. 107.

STP-iXA22052200 l/sN2 speed, down to 1.0e-9 mbarptb-seiko-seiki-stp-ixa2205+17 parameters

Seiko Instruments Inc., tmp maglev. Lifecycle: active.

ambient temp range0 to 40 °Cptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

bake temp max< 120 °Cptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

bearing typemagnetic bearing, 5 pairs of active magnetic bearingsptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 19.

compression h21×104ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

coolingWater coolingptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

inlet flangeISO250F/VG250/ICF305ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

lubricantNot necessaryptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

mass61 kgptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

max foreline pressure266 Paptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

mounting orientationFreeptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

noise level<55 dBptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

pumping speed h21700 L/sptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

pumping speed n22200 L/sptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23. Served to the builder as 2200 l/s. Export rule: published nitrogen pumping speed.

purge flange8.4×10-2 Pa·m3/sptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

rotation speed27000 rpmptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

startup time≤8 minptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

ultimate pressure10-7 Paptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

TURBOVAC MAG W 20001650 l/sN2 speed, down to 2.0e-10 mbart2-mag-w2000+14 parameters

Leybold, tmp maglev. Lifecycle: eol supported.

ambient temp range5 to 40 °Ct2-mag-w2000

Read on t2-mag-w2000 p. 7.

bake temp max100 °Ct2-mag-w2000

Read on t2-mag-w2000 p. 7.

bearing typemagnetict2-mag-w2000

Read on t2-mag-w2000 p. 1.

compression h29.6 × 10^3t2-mag-w2000

Read on t2-mag-w2000 p. 7.

compression n23.8 × 10^8t2-mag-w2000

Read on t2-mag-w2000 p. 7.

coolingwatert2-mag-w2000

Read on t2-mag-w2000 p. 7.

foreline flangeDN 40 KFt2-mag-w2000

Read on t2-mag-w2000 p. 7.

inlet flangeDN 250 CFt2-mag-w2000

Read on t2-mag-w2000 p. 7.

mass72 kgt2-mag-w2000

Read on t2-mag-w2000 p. 7.

max foreline pressure1 mbart2-mag-w2000

Read on t2-mag-w2000 p. 7.

pumping speed n21650 l/st2-mag-w2000

Read on t2-mag-w2000 p. 7. Served to the builder as 1650 l/s. Export rule: published nitrogen pumping speed.

rotation speed28800 min-1t2-mag-w2000

Read on t2-mag-w2000 p. 7.

startup time< 8 mint2-mag-w2000

Read on t2-mag-w2000 p. 7.

ultimate pressure2 × 10^-10 mbart2-mag-w2000

Read on t2-mag-w2000 p. 7.

TURBOVAC MAG W 2010 C1650 l/sN2 speed, down to 1.0e-8 mbart2-mag-w2010c+15 parameters

Leybold, tmp maglev. Lifecycle: eol supported.

ambient temp range5 to 40 °Ct2-mag-w2010c

Read on t2-mag-w2010c p. 6.

bearing typemagnetict2-mag-w2010c

Read on t2-mag-w2010c p. 3.

compression n2>10^8t2-mag-w2010c

Read on t2-mag-w2010c p. 6.

coolingwatert2-mag-w2010c

Read on t2-mag-w2010c p. 6.

inlet flangeDN 250 ISO-Ft2-mag-w2010c

Read on t2-mag-w2010c p. 6.

lubricantnone (magnetic bearing, no grease)t2-mag-w2010c

Read on t2-mag-w2010c p. 3.

magnetic field max5 mTt2-mag-w2010c

Read on t2-mag-w2010c p. 12.

massapprox. 65 kgt2-mag-w2010c

Read on t2-mag-w2010c p. 6.

max foreline pressure3.3 mbart2-mag-w2010c

Read on t2-mag-w2010c p. 6.

mounting orientationanyt2-mag-w2010c

Read on t2-mag-w2010c p. 3.

pumping speed n21650 l/st2-mag-w2010c

Read on t2-mag-w2010c p. 6. Served to the builder as 1650 l/s. Export rule: published nitrogen pumping speed.

purge flangeVCR Nut 1/4"t2-mag-w2010c

Read on t2-mag-w2010c p. 6.

rotation speed28800 min-1t2-mag-w2010c

Read on t2-mag-w2010c p. 6.

startup time<10 mint2-mag-w2010c

Read on t2-mag-w2010c p. 6.

ultimate pressurestated as a bound<10^-8 mbart2-mag-w2010c

Read on t2-mag-w2010c p. 6.

TURBOVAC MAG W 2010 CT1650 l/sN2 speed, down to 1.0e-8 mbart2-mag-w2010cht+20 parameters

Leybold, tmp maglev. Lifecycle: eol supported.

ambient temp range5 to 40 °Ct2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

bearing typemagnetict2-mag-w2010cht

Read on t2-mag-w2010cht p. 32.

compression n2> 10^8t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

coolingwatert2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

foreline flangeDN 40 KFt2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

inlet flangeDN 250 ISO-Ft2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

lubricantno greaset2-mag-w2010cht

Read on t2-mag-w2010cht p. 4.

magnetic field max≤ 5 mTt2-mag-w2010cht

Read on t2-mag-w2010cht p. 14.

mass65 kgt2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

max foreline pressure3.5 mbart2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

max foreline pressure ar4.3 mbart2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

max gas throughput ar1300 sccmt2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

mounting orientationanyt2-mag-w2010cht

Read on t2-mag-w2010cht p. 4.

noise level< 70 dB(A)t2-mag-w2010cht

Read on t2-mag-w2010cht p. 14.

pumping speed n21650 l/st2-mag-w2010cht

Read on t2-mag-w2010cht p. 6. Served to the builder as 1650 l/s. Export rule: published nitrogen pumping speed.

purge flangeVCR Nut 1/4"t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

rotation speed28800 min-1t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

service intervalnearly maintenance-freet2-mag-w2010cht

Read on t2-mag-w2010cht p. 46.

startup time< 8 mint2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

ultimate pressurestated as a bound< 10^-8 mbart2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

STP-A1603C1600 l/sN2 speed, down to 1.0e-9 mbarptb-edwards-stpa1603c+18 parameters

Edwards, tmp maglev. Lifecycle: active.

ambient temp range0 to 40 °Cptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

bake temp max< 120 °Cptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

bearing typemagnetic bearingptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 8.

compression h27×103ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

coolingWater coolingptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

inlet flangeISO200F/VG200/ICF253ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

lubricantNot necessaryptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

mass35 kgptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

max foreline pressure266 Paptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

max gas throughput n24.2 Pa·m3/sptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

mounting orientationFreeptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

noise level<50 dBptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

pumping speed h21200 L/sptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

pumping speed n21600 L/sptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7. Served to the builder as 1600 l/s. Export rule: published nitrogen pumping speed.

purge flange3.4×10-2 to 8.4×10-2 Pa·m3/sptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

rotation speed36500 rpmptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

startup time7 minptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

ultimate pressure10-7 Paptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

TURBOVAC MAG 20001550 l/sN2 speed, down to 1.0e-8 mbart2-mag1600-2000+16 parameters

Leybold, tmp maglev. Lifecycle: eol supported.

ambient temp range5 to 40 °Ct2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

bearing typemagnetict2-mag1600-2000

Read on t2-mag1600-2000 p. 41.

compression n2> 10^8t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

coolingwatert2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

foreline flangeDN 40 KFt2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

inlet flangeDN 250 ISO-Ft2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

lubricantno greaset2-mag1600-2000

Read on t2-mag1600-2000 p. 4.

mass68 kgt2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

max foreline pressure1.5 mbart2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

mounting orientationanyt2-mag1600-2000

Read on t2-mag1600-2000 p. 4.

noise level< 70 dB(A)t2-mag1600-2000

Read on t2-mag1600-2000 p. 23.

pumping speed n21550 l/st2-mag1600-2000

Read on t2-mag1600-2000 p. 9. Served to the builder as 1550 l/s. Export rule: published nitrogen pumping speed.

rotation speed28800 min-1t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

service intervalmaintenance-freet2-mag1600-2000

Read on t2-mag1600-2000 p. 62.

startup time< 10 mint2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

ultimate pressurestated as a bound< 10^-8 mbart2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

STP-H13031300 l/sN2 speed, down to 1.0e-9 mbarptb-seiko-seiki-stp-h803-1303+14 parameters

Seiko Instruments Inc., tmp maglev. Lifecycle: legacy in service.

ambient temp range0 to 40 °Cptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

bake temp max< 120 °Cptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

coolingWater coolingptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

inlet flangeVG200/ISO200ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

lubricantNot necessaryptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

mass39 kgptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

max foreline pressure270 Paptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

mounting orientationFreeptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

noise level<50 dBptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

pumping speed h21000 L/sptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

pumping speed n21300 L/sptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106. Served to the builder as 1300 l/s. Export rule: published nitrogen pumping speed.

rotation speed32500 rpmptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

startup time7 minptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

ultimate pressure10-7 Paptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

TMP-13031300 l/sN2 speed, down to 1.0e-10 mbarptb-shimadzu-tmp-803-1303+18 parameters

Shimadzu, tmp maglev. Lifecycle: active.

bake temp max120 °Cptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

bearing typemagnetic (radial + axial active maglev), touchdown backup bearingsptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 29.

compression h21 × 103ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

compression he1 × 104ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

compression n26 × 108ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

coolingair (cooling fan)ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

inlet flangeICF253 (Note 4)ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

lubricantnone (dry, oil-free touchdown bearings)ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 29.

magnetic field maxRadial 3 mT / Axial 15 mT mTptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

mass34 kgptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

mounting orientationIn any desired direction (Note 3)ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

pumping speed h2750 l/sptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

pumping speed he1050 l/sptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

pumping speed n21300 l/sptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36. Served to the builder as 1300 l/s. Export rule: published nitrogen pumping speed.

rotation speed30300 rpmptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

service intervalAnnual overhaul is recommendedptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 59.

startup time7 minutes or less minptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

ultimate pressure10-8 Pa order Paptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

TURBOVAC MAG 16001250 l/sN2 speed, down to 1.0e-8 mbart2-mag1600-2000+16 parameters

Leybold, tmp maglev. Lifecycle: eol supported.

ambient temp range5 to 40 °Ct2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

bearing typemagnetict2-mag1600-2000

Read on t2-mag1600-2000 p. 41.

compression n2> 10^8t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

coolingwatert2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

foreline flangeDN 40 KFt2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

inlet flangeDN 200 ISO-Ft2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

lubricantno greaset2-mag1600-2000

Read on t2-mag1600-2000 p. 4.

mass70 kgt2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

max foreline pressure1.5 mbart2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

mounting orientationanyt2-mag1600-2000

Read on t2-mag1600-2000 p. 4.

noise level< 70 dB(A)t2-mag1600-2000

Read on t2-mag1600-2000 p. 23.

pumping speed n21250 l/st2-mag1600-2000

Read on t2-mag1600-2000 p. 9. Served to the builder as 1250 l/s. Export rule: published nitrogen pumping speed.

rotation speed28800 min-1t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

service intervalmaintenance-freet2-mag1600-2000

Read on t2-mag1600-2000 p. 62.

startup time< 10 mint2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

ultimate pressurestated as a bound< 10^-8 mbart2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

MAG 1500 C/CT DN 2001100 l/sN2 speed, down to 1.0e-8 mbart2-magdigital+15 parameters

Leybold, tmp maglev. Lifecycle: eol supported.

ambient temp range5 to 40 °Ct2-magdigital

Read on t2-magdigital p. 10.

bake temp max120 °Ct2-magdigital

Read on t2-magdigital p. 10.

bearing typemagnetic bearingt2-magdigital

Read on t2-magdigital p. 1.

coolingwatert2-magdigital

Read on t2-magdigital p. 10.

inlet flange200 ISO-Ft2-magdigital

Read on t2-magdigital p. 11.

lubricantnone (magnetic bearing, no grease)t2-magdigital

Read on t2-magdigital p. 6.

mass32 kgt2-magdigital

Read on t2-magdigital p. 10.

max foreline pressure1.7 mbart2-magdigital

Read on t2-magdigital p. 11.

mounting orientationanyt2-magdigital

Read on t2-magdigital p. 6.

noise level< 70 dB(A)t2-magdigital

Read on t2-magdigital p. 24.

pumping speed h2920 l/st2-magdigital

Read on t2-magdigital p. 11.

pumping speed n21100 l/st2-magdigital

Read on t2-magdigital p. 11. Served to the builder as 1100 l/s. Export rule: published nitrogen pumping speed.

rotation speed36000 min-1t2-magdigital

Read on t2-magdigital p. 11.

startup time< 6 mint2-magdigital

Read on t2-magdigital p. 11.

ultimate pressurestated as a bound< 10-8 mbart2-magdigital

Read on t2-magdigital p. 11.

STP-10031000 l/sN2 speed, down to 1.0e-10 mbart2-stp-603-1003+18 parameters

Seiko Instruments Inc., tmp maglev. Lifecycle: eol supported.

ambient temp range0 to 40 °Ct2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

bake temp max<120 °Ct2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

bearing typemagnetict2-stp-603-1003

Read on t2-stp-603-1003 p. 22.

compression h210^5t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

compression n210^8t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

coolingNatural air cooling (Water cooling, Air cooling: At baking and gas pumping)t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

inlet flangeICF253/VG200/ISO200t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

lubricantNot necessaryt2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

magnetic field max15 mT (150 G) axial, 3 mT (30 G) radialt2-stp-603-1003

Read on t2-stp-603-1003 p. 28.

mass31 kgt2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

max foreline pressure13 (0.1)t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

mounting orientationFreet2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

noise level<50t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

pumping speed h2800 l/st2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

pumping speed n21000 l/st2-stp-603-1003

Read on t2-stp-603-1003 p. 107. Served to the builder as 1000 l/s. Export rule: published nitrogen pumping speed.

rotation speed35000 rpmt2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

startup time6 mint2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

ultimate pressurerestated in a second unit, 1.333x apart10^-8 Pa (10^-10 Torr)t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

STP-H803800 l/sN2 speed, down to 1.0e-9 mbarptb-seiko-seiki-stp-h803-1303+14 parameters

Seiko Instruments Inc., tmp maglev. Lifecycle: legacy in service.

ambient temp range0 to 40 °Cptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

bake temp max< 120 °Cptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

coolingWater coolingptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

inlet flangeVG150/ISO160ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

lubricantNot necessaryptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

mass39 kgptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

max foreline pressure270 Paptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

mounting orientationFreeptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

noise level<50 dBptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

pumping speed h2600 L/sptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

pumping speed n2800 L/sptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106. Served to the builder as 800 l/s. Export rule: published nitrogen pumping speed.

rotation speed32500 rpmptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

startup time7 minptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

ultimate pressure10-7 Paptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

TMP-803800 l/sN2 speed, down to 1.0e-11 mbarptb-shimadzu-tmp-803-1303+18 parameters

Shimadzu, tmp maglev. Lifecycle: active.

bake temp max120 °Cptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

bearing typemagnetic (radial + axial active maglev), touchdown backup bearingsptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 29.

compression h24 × 103ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

compression he8 × 104ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

compression n21 × 109 or moreptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

coolingair (cooling fan)ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

inlet flangeICF203 (Note 4)ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

lubricantnone (dry, oil-free touchdown bearings)ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 29.

magnetic field maxRadial 3 mT / Axial 15 mT mTptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

mass32 kg or less kgptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

mounting orientationIn any desired direction (Note 3)ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

pumping speed h2700 l/sptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

pumping speed he800 l/sptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

pumping speed n2800 l/sptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33. Served to the builder as 800 l/s. Export rule: published nitrogen pumping speed.

rotation speed35000 rpmptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

service intervalAnnual overhaul is recommendedptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 59.

startup time5 minutes or less minptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

ultimate pressure10-9 Pa order Paptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

MAG W 830 C700 l/sN2 speed, down to 1.0e-8 mbart2-magdigital05141+17 parameters

Leybold, tmp maglev. Lifecycle: eol supported.

ambient temp range5 – 40 °Ct2-magdigital05141

Read on t2-magdigital05141 p. 15.

bearing type5-axes controlled magnetic bearingt2-magdigital05141

Read on t2-magdigital05141 p. 10.

compression n2> 5·10^7 ratiot2-magdigital05141

Read on t2-magdigital05141 p. 15.

coolingwater typet2-magdigital05141

Read on t2-magdigital05141 p. 15.

inlet flangeDN 160 ISO-F flanget2-magdigital05141

Read on t2-magdigital05141 p. 15.

lubricantnone (grease-free magnetic bearing)t2-magdigital05141

Read on t2-magdigital05141 p. 10.

magnetic field max5 mTt2-magdigital05141

Read on t2-magdigital05141 p. 44.

mass32 kgt2-magdigital05141

Read on t2-magdigital05141 p. 15.

max foreline pressure2 mbart2-magdigital05141

Read on t2-magdigital05141 p. 15.

mounting orientationanyt2-magdigital05141

Read on t2-magdigital05141 p. 10.

noise level< 70 dB(A)t2-magdigital05141

Read on t2-magdigital05141 p. 44.

pumping speed h2300 l/st2-magdigital05141

Read on t2-magdigital05141 p. 15.

pumping speed n2700 l/st2-magdigital05141

Read on t2-magdigital05141 p. 15. Served to the builder as 700 l/s. Export rule: published nitrogen pumping speed.

purge flangeDN 10/16 flanget2-magdigital05141

Read on t2-magdigital05141 p. 22.

rotation speed24000 min-1t2-magdigital05141

Read on t2-magdigital05141 p. 15.

startup time< 4 mint2-magdigital05141

Read on t2-magdigital05141 p. 15.

ultimate pressurestated as a bound< 10^-8 mbart2-magdigital05141

Read on t2-magdigital05141 p. 15.

STP-603650 l/sN2 speed, down to 1.0e-10 mbart2-stp-603-1003+18 parameters

Seiko Instruments Inc., tmp maglev. Lifecycle: eol supported.

ambient temp range0 to 40 °Ct2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

bake temp max<120 °Ct2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

bearing typemagnetict2-stp-603-1003

Read on t2-stp-603-1003 p. 22.

compression h210^5t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

compression n210^8t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

coolingNatural air cooling (Water cooling, Air cooling: At baking and gas pumping)t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

inlet flangeICF203/VG150/ISO160t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

lubricantNot necessaryt2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

magnetic field max15 mT (150 G) axial, 3 mT (30 G) radialt2-stp-603-1003

Read on t2-stp-603-1003 p. 28.

mass31 kgt2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

max foreline pressure13 (0.1)t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

mounting orientationFreet2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

noise level<50t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

pumping speed h2550 l/st2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

pumping speed n2650 l/st2-stp-603-1003

Read on t2-stp-603-1003 p. 107. Served to the builder as 650 l/s. Export rule: published nitrogen pumping speed.

rotation speed35000 rpmt2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

startup time6 mint2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

ultimate pressurerestated in a second unit, 1.333x apart10^-8 Pa (10^-10 Torr)t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

STP-451480 l/sN2 speed, down to 1.0e-10 mbart2-stp301-451+20 parameters

Edwards, tmp maglev. Lifecycle: eol supported.

ambient temp range0 to 40 °Ct2-stp301-451

Read on t2-stp301-451 p. 112.

bake temp max<120 °Ct2-stp301-451

Read on t2-stp301-451 p. 112.

bearing typemagnetict2-stp301-451

Read on t2-stp301-451 p. 20.

compression h22 x 10^4t2-stp301-451

Read on t2-stp301-451 p. 112.

compression he5 x 10^5t2-stp301-451

Read on t2-stp301-451 p. 112.

compression n210^8t2-stp301-451

Read on t2-stp301-451 p. 112.

coolingNatural air cooling (Water/air cooling: for baking/gas suction)t2-stp301-451

Read on t2-stp301-451 p. 112.

inlet flangeICF203/VG150/ISO16t2-stp301-451

Read on t2-stp301-451 p. 112.

lubricantNot necessaryt2-stp301-451

Read on t2-stp301-451 p. 112.

magnetic field max15 mT (150 G) axial, 3 mT (30 G) radialt2-stp301-451

Read on t2-stp301-451 p. 25.

mass12 kgt2-stp301-451

Read on t2-stp301-451 p. 112.

max foreline pressure13 Pa (0.1 Torr)t2-stp301-451

Read on t2-stp301-451 p. 112.

mounting orientationFreet2-stp301-451

Read on t2-stp301-451 p. 112.

noise level<50 dBt2-stp301-451

Read on t2-stp301-451 p. 112.

pumping speed h2460 l/st2-stp301-451

Read on t2-stp301-451 p. 112.

pumping speed he460 l/st2-stp301-451

Read on t2-stp301-451 p. 112.

pumping speed n2480 l/st2-stp301-451

Read on t2-stp301-451 p. 112. Served to the builder as 480 l/s. Export rule: published nitrogen pumping speed.

rotation speed25,000 to 48,000 rpmt2-stp301-451

Read on t2-stp301-451 p. 112.

startup time3 mint2-stp301-451

Read on t2-stp301-451 p. 112.

ultimate pressurerestated in a second unit, 1.333x apart10^-8 Pa (10^-10 Torr)t2-stp301-451

Read on t2-stp301-451 p. 112.

TMP-403420 l/sN2 speed, down to 1.0e-10 mbarptb-shimadzu-tmp-403+19 parameters

Shimadzu, tmp maglev. Lifecycle: active.

ambient temp rangeOperation : 10 to 40 °C / Storage : -25 to 70 °C °Cptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

bake temp max120 °Cptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

bearing typemagnetic (radial + axial active maglev), touchdown backup bearingsptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 27.

compression h21 × 104ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

compression he8 × 104ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

compression n21 × 109ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

coolingair (cooling fan)ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

inlet flangeICF203 (Note 6)ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

lubricantnone (dry, oil-free touchdown bearings)ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 27.

magnetic field maxRadial 3 mT / Axial 15 mT mTptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

mass14 kgptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

mounting orientationIn any desired direction (Note 7)ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

pumping speed h2340 l/sptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

pumping speed he360 l/sptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

pumping speed n2420 l/sptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33. Served to the builder as 420 l/s. Export rule: published nitrogen pumping speed.

rotation speed45000 rpmptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

service intervalAnnual overhaul is recommendedptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 55.

startup time5 minutes or less minptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

ultimate pressure10-8 Pa order Paptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

STP-301300 l/sN2 speed, down to 1.0e-10 mbart2-stp301-451+20 parameters

Edwards, tmp maglev. Lifecycle: eol supported.

ambient temp range0 to 40 °Ct2-stp301-451

Read on t2-stp301-451 p. 112.

bake temp max<120 °Ct2-stp301-451

Read on t2-stp301-451 p. 112.

bearing typemagnetict2-stp301-451

Read on t2-stp301-451 p. 20.

compression h22 x 10^4t2-stp301-451

Read on t2-stp301-451 p. 112.

compression he5 x 10^5t2-stp301-451

Read on t2-stp301-451 p. 112.

compression n210^8t2-stp301-451

Read on t2-stp301-451 p. 112.

coolingNatural air cooling (Water/air cooling: for baking/gas suction)t2-stp301-451

Read on t2-stp301-451 p. 112.

inlet flangeICF152/VG100/ISO10t2-stp301-451

Read on t2-stp301-451 p. 112.

lubricantNot necessaryt2-stp301-451

Read on t2-stp301-451 p. 112.

magnetic field max15 mT (150 G) axial, 3 mT (30 G) radialt2-stp301-451

Read on t2-stp301-451 p. 25.

mass11 kgt2-stp301-451

Read on t2-stp301-451 p. 112.

max foreline pressure13 Pa (0.1 Torr)t2-stp301-451

Read on t2-stp301-451 p. 112.

mounting orientationFreet2-stp301-451

Read on t2-stp301-451 p. 112.

noise level<50 dBt2-stp301-451

Read on t2-stp301-451 p. 112.

pumping speed h2300 l/st2-stp301-451

Read on t2-stp301-451 p. 112.

pumping speed he280 l/st2-stp301-451

Read on t2-stp301-451 p. 112.

pumping speed n2300 l/st2-stp301-451

Read on t2-stp301-451 p. 112. Served to the builder as 300 l/s. Export rule: published nitrogen pumping speed.

rotation speed25,000 to 48,000 rpmt2-stp301-451

Read on t2-stp301-451 p. 112.

startup time3 mint2-stp301-451

Read on t2-stp301-451 p. 112.

ultimate pressurerestated in a second unit, 1.333x apart10^-8 Pa (10^-10 Torr)t2-stp301-451

Read on t2-stp301-451 p. 112.

STP-iX455300 l/sN2 speed, down to 1.0e-10 mbarptb-edwards-stp-ix455+17 parameters

Edwards, tmp maglev. Lifecycle: active.

ambient temp range0 to 40 °Cptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

bake temp max< 120 °Cptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

bearing type5 axis free-controlled magnetic bearingptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

compression h21×104ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

coolingNatural air coolingptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

lubricantNot necessaryptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

magnetic field max≦100 mGaussptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

mass16 kgptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

max foreline pressure67 Paptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

mounting orientationFreeptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

noise level<50 dBptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

power max5 Aptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 128.

pumping speed h2300 L/sptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

pumping speed n2300 L/sptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127. Served to the builder as 300 l/s. Export rule: published nitrogen pumping speed.

rotation speed55000 rpmptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

startup time≦6 minptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

ultimate pressure10-8 Paptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

TURBOVAC MAG W 300 iP300 l/sN2 speedtf-leybold-mag-w-300-manual+1 parameter

Leybold, tmp maglev. Lifecycle: active.

pumping speed n2300 l · s-1tf-leybold-mag-w-300-manual

Read on tf-leybold-mag-w-300-manual p. section 1.3 Technical data (colonnes MAG W 300 P/iP). Served to the builder as 300 l/s. Export rule: published nitrogen pumping speed.

TURBOVAC 340 M270 l/sN2 speed, down to 1.0e-10 mbarptb-leybold-turbovac340+19 parameters

Leybold, tmp maglev. Lifecycle: legacy in service.

ambient temp rangeup to 45 °Cptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 10.

compression h22.5·10^3ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

compression he6.4·10^4ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

compression n2> 10^9ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

coolingnot requiredptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

inlet flangeDN 100 ISO-Kptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

mass16 kgptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

max foreline pressure5·10^-1 mbarptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

mounting orientationanyptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

noise level< 70 dB(A)ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 10.

pumping speed h2340 l/sptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

pumping speed he370 l/sptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

pumping speed n2270 l/sptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7. Served to the builder as 270 l/s. Export rule: published nitrogen pumping speed.

purge flangeDN 10 KFptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

rotation speed51600 min-1ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

service intervalnot_applicableptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 25.

startup time3.5 minptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

ultimate pressurestated as a bound< 10^-10 mbarptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

venting flangeDN 10 KFptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

EXT250M240 l/sN2 speed, down to 5.0e-9 mbart2-ext250m+23 parameters

Edwards, tmp maglev. Lifecycle: eol supported.

ambient temp range0 - 35 C Ct2-ext250m

Read on t2-ext250m p. 15.

bake temp max100 Ct2-ext250m

Read on t2-ext250m p. 12.

bearing typefrictionless passive magnetic bearings (radial, both shaft ends) + active electromagnetic bearing (axial)t2-ext250m

Read on t2-ext250m p. 8.

compression h21500t2-ext250m

Read on t2-ext250m p. 15.

compression he2 x 10^4t2-ext250m

Read on t2-ext250m p. 15.

compression n2>1 x 10^8t2-ext250m

Read on t2-ext250m p. 15.

coolingfree convection / forced air / watert2-ext250m

Read on t2-ext250m p. 15.

inlet flangeDN100CF/DN100ISO-Kt2-ext250m

Read on t2-ext250m p. 15.

lubricantoil-freet2-ext250m

Read on t2-ext250m p. 17.

magnetic field max5 mTt2-ext250m

Read on t2-ext250m p. 12.

mass11 kg (DN100CF)/8.5 kg (DN100ISO-K) kgt2-ext250m

Read on t2-ext250m p. 15.

mounting orientationany orientationt2-ext250m

Read on t2-ext250m p. 15.

noise level< 50 dBA dBAt2-ext250m

Read on t2-ext250m p. 15.

pumping speed h2190 l/st2-ext250m

Read on t2-ext250m p. 15.

pumping speed he250 l/st2-ext250m

Read on t2-ext250m p. 15.

pumping speed n2240 l/st2-ext250m

Read on t2-ext250m p. 15. Served to the builder as 240 l/s. Export rule: published nitrogen pumping speed.

purge flangeNW10t2-ext250m

Read on t2-ext250m p. 15.

rotation speed60000 r/mint2-ext250m

Read on t2-ext250m p. 15.

service intervalno routine maintenancet2-ext250m

Read on t2-ext250m p. 32.

standby power15 Wt2-ext250m

Read on t2-ext250m p. 15.

startup time90 st2-ext250m

Read on t2-ext250m p. 15.

ultimate pressurestated as a bound<5 x 10-9 mbar, <5 x 10-7 Pa mbart2-ext250m

Read on t2-ext250m p. 15.

venting flange1/8-inch BSP femalet2-ext250m

Read on t2-ext250m p. 15.

TURBOVAC MAG 400no pumping speed published under any keydown to 1.0e-10 mbar+18 parameters

Leybold, tmp maglev. Lifecycle: eol supported.

ambient temp range≤ 40 °Ct2-mag400

Read on t2-mag400 p. 10.

bearing typemagnetict2-mag400

Read on t2-mag400 p. 22.

compression h22.5·10^3t2-mag400

Read on t2-mag400 p. 6.

compression he6.4·10^4t2-mag400

Read on t2-mag400 p. 6.

compression n2> 10^9t2-mag400

Read on t2-mag400 p. 6.

coolingwatert2-mag400

Read on t2-mag400 p. 6.

foreline flangeDN 25 KFt2-mag400

Read on t2-mag400 p. 6.

inlet flangeDN 100 ISO-Kt2-mag400

Read on t2-mag400 p. 6.

magnetic field max≤ 5 mTt2-mag400

Read on t2-mag400 p. 10.

mass16 kgt2-mag400

Read on t2-mag400 p. 6.

max foreline pressure0.8 mbart2-mag400

Read on t2-mag400 p. 6.

mounting orientationanyt2-mag400

Read on t2-mag400 p. 5.

noise level< 70 dB(A)t2-mag400

Read on t2-mag400 p. 10.

purge flangeDN 10 KFt2-mag400

Read on t2-mag400 p. 6.

service intervalmaintenance-freet2-mag400

Read on t2-mag400 p. 25.

startup time3.5 mint2-mag400

Read on t2-mag400 p. 6.

ultimate pressurestated as a bound< 10^-10 mbart2-mag400

Read on t2-mag400 p. 6.

venting flangeDN 10 KFt2-mag400

Read on t2-mag400 p. 6.

1 model the base carries no speed and no ultimate for

They are in the corpus and they are named here. What is missing is a published value to judge them on, which is not the same as a model that fails.

  • STP-A1303 Edwards 0 parameters
The 22 documents this family reads
  1. ptb-edwards-stp-f2203c Instruction Manual (B) - STP Series Turbomolecular Pumps - STP-F2203 Series - Pump Specific Information (MT-50E-101-A) Edwards https://www.ptb-sales.com/manuals/edwards/stp-f2203c.pdf
  2. ptb-edwards-stp-ix455 Instruction Manual - STP Series Turbomolecular Pumps - STP-iX455/iXL455 Series (MT-64E-002-E) Edwards https://www.ptb-sales.com/manuals/edwards/stp-ix455.pdf
  3. ptb-edwards-stpa1603c Instruction Manual (B) - STP Series Turbomolecular Pumps - STP-A1603 Series - Pump Specific Information (MT-46E-101-A) Edwards https://www.ptb-sales.com/manuals/edwards/stpa1603c.pdf
  4. ptb-leybold-turbovac340 TURBOVAC 340 M / 340 MC / 340 MCT / 341 MCT - Turbomolecular Pumps with Magnetic Bearing - Operating Instructions Leybold Vacuum https://www.ptb-sales.com/manuals/leybold/turbovac340.pdf
  5. ptb-seiko-seiki-stp-h803-1303 Instruction Manual - Seiko Seiki STPH803C/H1303C/H803CI (P033) Turbomolecular Pump System (B717-00-880 Issue E) Seiko Seiki / BOC Edwards https://www.ptb-sales.com/manuals/seiko_seiki/stp-h803-1303.pdf
  6. ptb-seiko-seiki-stp-ixa2205 Instruction Manual - STP Series Turbomolecular Pumps - STP-iXA2205 Series (MT-63E-001-H) Seiko Instruments / Edwards https://www.ptb-sales.com/manuals/seiko_seiki/stp-ixa2205.pdf
  7. ptb-shimadzu-tmp-3203-3403 Magnetically Levitated Turbo Molecular Pump - Model:TMP-3203M (Air cooled type) / TMP-3203MC (Air cooled chemical type) / TMP-3203LM (Wide range type) / TMP-3203LMC (Wide range chemical type) / TMP-3403LMC (Wide range chemical type) - Instruction Manual (263-13236E) Shimadzu https://www.ptb-sales.com/manuals/shimadzu/tmp-3203-3403.pdf
  8. ptb-shimadzu-tmp-403 Magnetically Levitated Turbo Molecular Pump - TMP-203M,TMP-303M,TMP-403M (Air cooled type) / TMP-203MC,TMP-303MC,TMP-403MC (Air cooled chemical type) / TMP-203LM,TMP-303LM,TMP-403LM (Wide range type) / TMP-203LMC,TMP-303LMC,TMP-403LMC (Wide range chemical type) - Instruction Manual (263-13238C) Shimadzu https://www.ptb-sales.com/manuals/shimadzu/tmp-403.pdf
  9. ptb-shimadzu-tmp-803-1303 Magnetically Levitated Turbo Molecular Pump - Model:TMP-803M,TMP-1003M,TMP-1103MP,TMP-1303M (Air cooled type) / TMP-803MC,TMP-1003MC,TMP-1103MPC,TMP-1303MC (Air cooled chemical type) / TMP-803LM,TMP-1003LM,TMP-1103LMP,TMP-1303LM (Wide range type) / TMP-803LMC,TMP-1003LMC,TMP-1103LMPC,TMP-1303LMC (Wide range chemical type) - Instruction Manual (263-13232B) Shimadzu https://www.ptb-sales.com/manuals/shimadzu/tmp-803-1303.pdf
  10. t2-ext250m Edwards https://www.ptb-sales.com/manuals/edwards/ext250m.pdf
  11. t2-mag-w2000 Leybold https://www.ptb-sales.com/manuals/leybold/mag_w2000.pdf
  12. t2-mag-w2010c Leybold https://www.ptb-sales.com/manuals/leybold/mag_w2010c.pdf
  13. t2-mag-w2010cht Leybold https://www.ptb-sales.com/manuals/leybold/mag_w2010cht.pdf
  14. t2-mag1600-2000 Leybold https://www.ptb-sales.com/manuals/leybold/mag1600-2000.pdf
  15. t2-mag400 Leybold https://www.ptb-sales.com/manuals/leybold/mag400.pdf
  16. t2-magdigital Leybold https://www.ptb-sales.com/manuals/leybold/magdigital.pdf
  17. t2-magdigital05141 Leybold https://www.ptb-sales.com/manuals/leybold/magdigital05141.pdf
  18. t2-stp-603-1003 Seiko Seiki (ligne STP) https://www.ptb-sales.com/manuals/seiko_seiki/stp-603-1003.pdf
  19. t2-stp-a2203 Seiko Seiki (ligne STP) https://www.ptb-sales.com/manuals/seiko_seiki/stp-a2203.pdf
  20. t2-stp-a2503-a3003 Seiko Seiki (ligne STP) https://www.ptb-sales.com/manuals/seiko_seiki/stp-a2503_a3003.pdf
  21. t2-stp301-451 Edwards https://www.ptb-sales.com/manuals/edwards/stp301-451.pdf
  22. tf-leybold-mag-w-300-manual Leybold https://nl.shop.leybold.com/medias/17200045-002-Instructions.pdf?context=bWFzdGVyfHJvb3R8NjI3MTYyNXxhcHBsaWNhdGlvbi9wZGZ8YURBekwyZzVOeTgyTnpJek1qUTNORE16TXpJeE5DOHhOekl3TURBME5WOHdNREpmU1c1emRISjFZM1JwYjI1ekxuQmtaZ3wyMmIzNmI3MWRmYjVmYmZlYTQ2MDRjODY4ZDQxMmI0OTQ2YTljMTA3MTI0ZjVjMWE1ZTBmYTliNjY3MGQ3Nzhk&attachment=true