TOOLS

multistage roots pumps

46 models in this family, 320 published parameters, each carrying the source key and the page it was read on.

Back to the selector, which answers across all 333 models and 14 families.

ESA500W833 l/sNominal displacement speeddrypump-ebara-esa500w+7 parameters

Ebara Corporation, multistage roots.

ambient temp range30 degrees of centigrade of lowerdrypump-ebara-esa500w

Read on drypump-ebara-esa500w.

inlet flangeISO160drypump-ebara-esa500w

Read on drypump-ebara-esa500w.

mass750 kgdrypump-ebara-esa500w

Read on drypump-ebara-esa500w.

power max33.2 kWdrypump-ebara-esa500w

Read on drypump-ebara-esa500w.

pumping speed nominal47000 L/min @ 50 Hz, 50000 L/min @ 60 Hz L/mindrypump-ebara-esa500w

Read on drypump-ebara-esa500w p. 7. Served to the builder as 833 l/s, read from 50000 L/min. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: l/min to l/s, exact factor 1/60.

purge gas required8.5 ～ 11.0 Pa m3/sdrypump-ebara-esa500w

Read on drypump-ebara-esa500w.

ultimate pressure1.0 Padrypump-ebara-esa500w

Read on drypump-ebara-esa500w.

A 3004833 l/sNominal displacement speed, down to 4.0e-3 mbardrypump-pfeiffer-a4-series+11 parameters

Pfeiffer Vacuum, multistage roots.

ambient temp range5-40 °Cdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

corrosive variantH, Xdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

exhaust pressure max1200 hPadrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

inlet flangeDN 160 ISO-Kdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

mass800 kgdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

noise level< 72 dB(A)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

power max8 kWdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

pumping speed nominal3000 m3/hdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series. Served to the builder as 833 l/s, read from 3000 m3/h. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: m3/h to l/s, exact factor 1/3.6.

purge gas requiredN2 purge flow 10 à 120 slmdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

temperature controlledyesdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

ultimate pressure4 ·10-3 hPa (without N2 purge)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

A 2504694 l/sNominal displacement speed, down to 4.0e-3 mbardrypump-pfeiffer-a4-series+11 parameters

Pfeiffer Vacuum, multistage roots.

ambient temp range5-40 °Cdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

corrosive variantH, Xdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

exhaust pressure max1200 hPadrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

inlet flangeDN 160 ISO-Kdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

mass800 kgdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

noise level< 72 dB(A)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

power max8 kWdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

pumping speed nominal2500 m3/hdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series. Served to the builder as 694 l/s, read from 2500 m3/h. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: m3/h to l/s, exact factor 1/3.6.

purge gas requiredN2 purge flow 10 à 120 slmdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

temperature controlledyesdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

ultimate pressure4·10-3 hPa (without N2 purge)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

A 2404639 l/sNominal displacement speed, down to 4.0e-3 mbardrypump-pfeiffer-a4-series+11 parameters

Pfeiffer Vacuum, multistage roots.

ambient temp range5-40 °Cdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

corrosive variantH, Xdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

exhaust pressure max1200 hPadrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

inlet flangeDN 160 ISO-Kdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

mass640 kgdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

noise level< 71 dB(A)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

power max8 kWdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

pumping speed nominal2300 m3/hdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series. Served to the builder as 639 l/s, read from 2300 m3/h. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: m3/h to l/s, exact factor 1/3.6.

purge gas requiredN2 purge flow 10 to 120 slmdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

temperature controlledyesdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

ultimate pressure-/4·10-3 hPa (without N2 purge)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

ESA300W500 l/sNominal displacement speeddrypump-ebara-esa300w+5 parameters

Ebara Corporation, multistage roots.

inlet flangeISO100drypump-ebara-esa300w

Read on drypump-ebara-esa300w.

mass700 kgdrypump-ebara-esa300w

Read on drypump-ebara-esa300w.

power max19.5 kWdrypump-ebara-esa300w

Read on drypump-ebara-esa300w.

pumping speed nominal28000 L/min @ 50 Hz, 30000 L/min @ 60 Hz L/mindrypump-ebara-esa300w

Read on drypump-ebara-esa300w p. 17. Served to the builder as 500 l/s, read from 30000 L/min. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: l/min to l/s, exact factor 1/60.

ultimate pressure0.53 Padrypump-ebara-esa300w

Read on drypump-ebara-esa300w.

ESA300W-H500 l/sNominal displacement speeddrypump-ebara-esa300w+5 parameters

Ebara Corporation, multistage roots.

inlet flangeISO100drypump-ebara-esa300w

Read on drypump-ebara-esa300w.

mass700 kgdrypump-ebara-esa300w

Read on drypump-ebara-esa300w.

power max19.5 kWdrypump-ebara-esa300w

Read on drypump-ebara-esa300w.

pumping speed nominal28000 L/min @ 50 Hz, 30000 L/min @ 60 Hz L/mindrypump-ebara-esa300w

ultimate pressure1.3 Padrypump-ebara-esa300w

Read on drypump-ebara-esa300w.

iH1800500 l/sNominal displacement speed, down to 1.0e-3 mbardrypump-edwards-ih-1800+7 parameters

Edwards, multistage roots.

ambient temp range5 to 40 °Cdrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

inlet flangeISO160drypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

mass502 kgdrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

max inlet pressure continuousAtmosphericdrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

noise level<69 dB(A)drypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

pumping speed nominal1800 m3 h-1drypump-edwards-ih-1800

Read on drypump-edwards-ih-1800. Served to the builder as 500 l/s, read from 1800 m3 h-1. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: m3/h to l/s, exact factor 1/3.6.

ultimate pressure1x10-3 mbar, shaft seal purge onlydrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

A 1804472 l/sNominal displacement speed, down to 8.0e-3 mbardrypump-pfeiffer-a4-series+11 parameters

Pfeiffer Vacuum, multistage roots.

ambient temp range5-40 °Cdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

corrosive variantH, Xdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

exhaust pressure max1200 hPadrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

inlet flangeDN 160 ISO-Kdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

mass540 kgdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

noise level< 69 dB(A)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

power max8 kWdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

pumping speed nominal1650/1700 m3/hdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series. Served to the builder as 472 l/s, read from 1700 m3/h. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: m3/h to l/s, exact factor 1/3.6.

purge gas requiredN2 purge flow 10 to 120 slmdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

temperature controlledyesdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

ultimate pressurerestated in a second unit, 2x apart8·10-3 /4·10-3 hPa (without N2 purge)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

ESA200W333 l/sNominal displacement speeddrypump-ebara-esa200w+7 parameters

Ebara Corporation, multistage roots.

ambient temp range30 degrees of centigrade of lowerdrypump-ebara-esa200w

Read on drypump-ebara-esa200w.

inlet flangeNW80drypump-ebara-esa200w

Read on drypump-ebara-esa200w.

mass410 kgdrypump-ebara-esa200w

Read on drypump-ebara-esa200w.

noise level64drypump-ebara-esa200w

Read on drypump-ebara-esa200w.

pumping speed nominal20000 L/mindrypump-ebara-esa200w

Read on drypump-ebara-esa200w. Served to the builder as 333 l/s, read from 20000 L/min. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: l/min to l/s, exact factor 1/60.

purge gas required17 - 20 Pa m3/sdrypump-ebara-esa200w

Read on drypump-ebara-esa200w.

ultimate pressure0.53 Padrypump-ebara-esa200w

Read on drypump-ebara-esa200w.

EV-S200333 l/sNominal displacement speeddrypump-ebara-ev-s+7 parameters

Ebara Corporation, multistage roots.

ambient temp rangenot exceeding 30°Cdrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

corrosive variantNdrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

inlet flangeNW100drypump-ebara-ev-s

Read on drypump-ebara-ev-s.

mass170 kgdrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

power max5.1 kWdrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

pumping speed nominal20000 L/mindrypump-ebara-ev-s

Read on drypump-ebara-ev-s. Served to the builder as 333 l/s, read from 20000 L/min. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: l/min to l/s, exact factor 1/60.

ultimate pressure0.5 Padrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

A 1504333 l/sNominal displacement speed, down to 8.0e-3 mbardrypump-pfeiffer-a4-series+11 parameters

Pfeiffer Vacuum, multistage roots.

ambient temp range5-40 °Cdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

corrosive variantH, Xdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

exhaust pressure max1200 hPadrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

inlet flangeDN 160 ISO-Kdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

mass540 kgdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

noise level< 69 dB(A)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

power max5 kWdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

pumping speed nominal1100/1200 m3/hdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series. Served to the builder as 333 l/s, read from 1200 m3/h. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: m3/h to l/s, exact factor 1/3.6.

purge gas requiredN2 purge flow 10 to 120 slmdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

temperature controlledyesdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

ultimate pressurerestated in a second unit, 2x apart8 ·10-3 /4·10-3 hPa (without N2 purge)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

A 1204319 l/sNominal displacement speed, down to 4.0e-3 mbardrypump-pfeiffer-a4-series+10 parameters

Pfeiffer Vacuum, multistage roots.

ambient temp range5-40 °Cdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

corrosive variantHdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

exhaust pressure max1200 hPadrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

inlet flangeDN 160 ISO-Kdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

mass530 kgdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

noise level< 69 dB(A)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

pumping speed nominal1050/1150 m3/hdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series. Served to the builder as 319 l/s, read from 1150 m3/h. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: m3/h to l/s, exact factor 1/3.6.

purge gas requiredN2 purge flow 10 to 120 slmdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

temperature controlledyesdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

ultimate pressurerestated in a second unit, 1.818x apart4·10-3 /2.2·10-3 hPa (without N2 purge)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

iH1000278 l/sNominal displacement speed, down to 2.0e-3 mbardrypump-edwards-ih-1800+7 parameters

Edwards, multistage roots.

ambient temp range5 to 40 °Cdrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

inlet flangeISO100drypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

mass430 kgdrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

max inlet pressure continuousAtmosphericdrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

noise level< 69 dB(A)drypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

pumping speed nominal950 m3 h-1 @ 50 Hz, 1000 m3 h-1 @ 60 Hz m3 h-1drypump-edwards-ih-1800

Read on drypump-edwards-ih-1800 p. 7. Served to the builder as 278 l/s, read from 1000 m3 h-1. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: m3/h to l/s, exact factor 1/3.6.

ultimate pressurerestated in a second unit, 2x apart2 x 10-3/ 1 x 10-3 mbar (50 Hz / 60 Hz), shaft seal purge onlydrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

iQDP80/iQMB1200226 l/sNominal displacement speed, down to 2.0e-3 mbardrypump-edwards-iqdp+6 parameters

Edwards, multistage roots.

ambient temp range5 to 40 oCdrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

inlet flangeISO 160 bolteddrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

mass450 kg (frame mounted)drypump-edwards-iqdp

Read on drypump-edwards-iqdp.

max inlet pressure continuous1 mbar (1 x 102 Pa)drypump-edwards-iqdp

Read on drypump-edwards-iqdp.

pumping speed nominal815 m3 h-1drypump-edwards-iqdp

Read on drypump-edwards-iqdp. Served to the builder as 226 l/s, read from 815 m3 h-1. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: m3/h to l/s, exact factor 1/3.6.

ultimate pressure2.0 x 10-3 mbar (2.0 x 10-1 Pa), 50 Hz, shaft-seals purge onlydrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

A 804194 l/sNominal displacement speed, down to 8.0e-3 mbardrypump-pfeiffer-a4-series+11 parameters

Pfeiffer Vacuum, multistage roots.

ambient temp range5-40 °Cdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

corrosive variantH, Xdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

exhaust pressure max1200 hPadrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

inlet flangeDN 100 ISO-Kdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

mass380 kgdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

noise level< 68 dB(A)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

power max4.5 kWdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

pumping speed nominal600/700 m3/hdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series. Served to the builder as 194 l/s, read from 700 m3/h. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: m3/h to l/s, exact factor 1/3.6.

purge gas requiredN2 purge flow 10 to 120 slmdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

temperature controlledyesdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

ultimate pressurerestated in a second unit, 2x apart8·10-3 /4·10-3 hPa (without N2 purge)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

EV-S100167 l/sNominal displacement speeddrypump-ebara-ev-s+7 parameters

Ebara Corporation, multistage roots.

ambient temp rangenot exceeding 30°Cdrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

corrosive variantNdrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

inlet flangeNW80drypump-ebara-ev-s

Read on drypump-ebara-ev-s.

mass120 kgdrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

power max4.6 kWdrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

pumping speed nominal10000 L/mindrypump-ebara-ev-s

Read on drypump-ebara-ev-s. Served to the builder as 167 l/s, read from 10000 L/min. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: l/min to l/s, exact factor 1/60.

ultimate pressure0.5 Padrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

iH600167 l/sNominal displacement speed, down to 2.0e-3 mbardrypump-edwards-ih-1800+6 parameters

Edwards, multistage roots.

ambient temp range5 to 40 °Cdrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

inlet flangeISO100drypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

mass415 kgdrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

noise level< 67 dB(A)drypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

pumping speed nominal518 m3 h-1 @ 50 Hz, 600 m3 h-1 @ 60 Hz m3 h-1drypump-edwards-ih-1800

Read on drypump-edwards-ih-1800 p. 7. Served to the builder as 167 l/s, read from 600 m3 h-1. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: m3/h to l/s, exact factor 1/3.6.

ultimate pressurerestated in a second unit, 2.857x apart2 x 10-3/ 7 x 10-4 mbar (50 Hz / 60 Hz), shaft seal purge onlydrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

A 604156 l/sNominal displacement speed, down to 3.0e-3 mbardrypump-pfeiffer-a4-series+10 parameters

Pfeiffer Vacuum, multistage roots.

ambient temp range5-40 °Cdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

corrosive variantHdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

exhaust pressure max1200 hPadrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

inlet flangeDN 100 ISO-Kdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

mass370 kgdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

noise level< 68 dB(A)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

pumping speed nominal480/560 m3/hdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series. Served to the builder as 156 l/s, read from 560 m3/h. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: m3/h to l/s, exact factor 1/3.6.

purge gas requiredN2 purge flow 10 to 120 slmdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

temperature controlledyesdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

ultimate pressurerestated in a second unit, 1.5x apart3·10-3 /2·10-3 hPa (without N2 purge)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

iL600144 l/sNominal displacement speed, down to 3.0e-3 mbardrypump-edwards-il70-il600+7 parameters

Edwards, multistage roots.

ambient temp range5 to 40 oCdrypump-edwards-il70-il600

Read on drypump-edwards-il70-il600.

exhaust pressure max3 p.s.i. (0.207 bar, 2.07 x 104Pa)drypump-edwards-il70-il600

Read on drypump-edwards-il70-il600.

inlet flangeISO100 bolteddrypump-edwards-il70-il600

Read on drypump-edwards-il70-il600.

mass395 kgdrypump-edwards-il70-il600

Read on drypump-edwards-il70-il600.

noise level< 62 dB(A)drypump-edwards-il70-il600

Read on drypump-edwards-il70-il600.

pumping speed nominal518 m3h-1drypump-edwards-il70-il600

Read on drypump-edwards-il70-il600. Served to the builder as 144 l/s, read from 518 m3h-1. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: m3/h to l/s, exact factor 1/3.6.

ultimate pressurestated as a bound< 3 x 10-3 mbar (< 3 x 10-1 Pa),drypump-edwards-il70-il600

Read on drypump-edwards-il70-il600.

A70W140 l/sNominal displacement speeddrypump-ebara-a-series-rev3b+3 parameters

Ebara Corporation, multistage roots.

inlet flangeNW50drypump-ebara-a-series-rev3b

Read on drypump-ebara-a-series-rev3b.

pumping speed nominal7000 L/min @ 50 Hz, 8400 L/min @ 60 Hz L/mindrypump-ebara-a-series-rev3b

Read on drypump-ebara-a-series-rev3b p. 5. Served to the builder as 140 l/s, read from 8400 L/min. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: l/min to l/s, exact factor 1/60.

ultimate pressure0.27 / 0.13 Padrypump-ebara-a-series-rev3b

Read on drypump-ebara-a-series-rev3b.

ESA70W140 l/sNominal displacement speeddrypump-ebara-esa70w+5 parameters

Ebara Corporation, multistage roots.

ambient temp range30 degrees centigrade of lowerdrypump-ebara-esa70w

Read on drypump-ebara-esa70w.

inlet flangeNW50drypump-ebara-esa70w

Read on drypump-ebara-esa70w.

mass380 kgdrypump-ebara-esa70w

Read on drypump-ebara-esa70w.

pumping speed nominal7000 L/min @ 50 Hz, 8400 L/min @ 60 Hz L/mindrypump-ebara-esa70w

Read on drypump-ebara-esa70w p. 7. Served to the builder as 140 l/s, read from 8400 L/min. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: l/min to l/s, exact factor 1/60.

ultimate pressure0.27 / 0.13 Padrypump-ebara-esa70w

Read on drypump-ebara-esa70w.

ESA70WN140 l/sNominal displacement speeddrypump-ebara-esa70w+5 parameters

Ebara Corporation, multistage roots.

ambient temp range30 degrees centigrade of lowerdrypump-ebara-esa70w

Read on drypump-ebara-esa70w.

inlet flangeNW50drypump-ebara-esa70w

Read on drypump-ebara-esa70w.

mass380 kgdrypump-ebara-esa70w

Read on drypump-ebara-esa70w.

pumping speed nominal7000 L/min @ 50 Hz, 8400 L/min @ 60 Hz L/mindrypump-ebara-esa70w

ultimate pressure0.4 / 0.27 Padrypump-ebara-esa70w

Read on drypump-ebara-esa70w.

iQDP80/iQMB500108 l/sNominal displacement speed, down to 2.0e-3 mbardrypump-edwards-iqdp+5 parameters

Edwards, multistage roots.

ambient temp range5 to 40 oCdrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

inlet flangeISO100 bolteddrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

max inlet pressure continuous20 mbar (2 x 103 Pa)drypump-edwards-iqdp

Read on drypump-edwards-iqdp.

pumping speed nominal390 m3 h-1drypump-edwards-iqdp

Read on drypump-edwards-iqdp. Served to the builder as 108 l/s, read from 390 m3 h-1. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: m3/h to l/s, exact factor 1/3.6.

ultimate pressure2.0 x 10-3 mbar (2.0 x 10-1 Pa), 50 Hz, shaft-seals purge onlydrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

iQDP40/iQMB50097.2 l/sNominal displacement speed, down to 2.5e-3 mbardrypump-edwards-iqdp+5 parameters

Edwards, multistage roots.

ambient temp range5 to 40 oCdrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

inlet flangeISO100 bolteddrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

max inlet pressure continuous20 mbar (2 x 103 Pa)drypump-edwards-iqdp

Read on drypump-edwards-iqdp.

pumping speed nominal350 m3 h-1drypump-edwards-iqdp

Read on drypump-edwards-iqdp. Served to the builder as 97.2 l/s, read from 350 m3 h-1. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: m3/h to l/s, exact factor 1/3.6.

ultimate pressure2.5 x 10-3 mbar (2.5 x 10-1 Pa), 50 Hz, shaft-seals purge onlydrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

EV-S5083.3 l/sNominal displacement speeddrypump-ebara-ev-s+7 parameters

Ebara Corporation, multistage roots.

ambient temp rangenot exceeding 30°Cdrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

corrosive variantNdrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

inlet flangeNW50drypump-ebara-ev-s

Read on drypump-ebara-ev-s.

mass100 kgdrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

power max3.6 kWdrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

pumping speed nominal5000 L/mindrypump-ebara-ev-s

Read on drypump-ebara-ev-s. Served to the builder as 83.3 l/s, read from 5000 L/min. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: l/min to l/s, exact factor 1/60.

ultimate pressure0.5 Padrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

iQDP80/iQMB25072.2 l/sNominal displacement speed, down to 2.0e-3 mbardrypump-edwards-iqdp+5 parameters

Edwards, multistage roots.

ambient temp range5 to 40 oCdrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

inlet flangeISO63 bolteddrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

max inlet pressure continuous20 mbar (2 x 103 Pa)drypump-edwards-iqdp

Read on drypump-edwards-iqdp.

pumping speed nominal260 m3 h-1drypump-edwards-iqdp

Read on drypump-edwards-iqdp. Served to the builder as 72.2 l/s, read from 260 m3 h-1. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: m3/h to l/s, exact factor 1/3.6.

ultimate pressure2.0 x 10-3 mbar (2.0 x 10-1 Pa), 50 Hz, shaft-seals purge onlydrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

iQDP40/iQMB25065.3 l/sNominal displacement speed, down to 2.5e-3 mbardrypump-edwards-iqdp+5 parameters

Edwards, multistage roots.

ambient temp range5 to 40 oCdrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

inlet flangeISO63 bolteddrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

max inlet pressure continuous20 mbar (2 x 103 Pa)drypump-edwards-iqdp

Read on drypump-edwards-iqdp.

pumping speed nominal235 m3 h-1drypump-edwards-iqdp

Read on drypump-edwards-iqdp. Served to the builder as 65.3 l/s, read from 235 m3 h-1. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: m3/h to l/s, exact factor 1/3.6.

ultimate pressure2.5 x 10-3 mbar (2.5 x 10-1 Pa), 50 Hz, shaft-seals purge onlydrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

A30W60 l/sNominal displacement speeddrypump-ebara-a-series-rev3b+3 parameters

Ebara Corporation, multistage roots.

inlet flangeNW50drypump-ebara-a-series-rev3b

Read on drypump-ebara-a-series-rev3b.

pumping speed nominal3000 L/min @ 50 Hz, 3600 L/min @ 60 Hz L/mindrypump-ebara-a-series-rev3b

Read on drypump-ebara-a-series-rev3b p. 5. Served to the builder as 60 l/s, read from 3600 L/min. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: l/min to l/s, exact factor 1/60.

ultimate pressure0.4 / 0.27 Padrypump-ebara-a-series-rev3b

Read on drypump-ebara-a-series-rev3b.

A25S50 l/sNominal displacement speeddrypump-ebara-a-series-rev3b+3 parameters

Ebara Corporation, multistage roots.

inlet flangeNW50drypump-ebara-a-series-rev3b

Read on drypump-ebara-a-series-rev3b.

pumping speed nominal2500 L/min @ 50 Hz, 3000 L/min @ 60 Hz L/mindrypump-ebara-a-series-rev3b

Read on drypump-ebara-a-series-rev3b p. 6. Served to the builder as 50 l/s, read from 3000 L/min. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: l/min to l/s, exact factor 1/60.

ultimate pressure5.3 / 4.0 Padrypump-ebara-a-series-rev3b

Read on drypump-ebara-a-series-rev3b.

ESA25-D50 l/sNominal displacement speeddrypump-ebara-esa25+7 parameters

Ebara Corporation, multistage roots.

ambient temp range30 degrees of centigrade of lowerdrypump-ebara-esa25

Read on drypump-ebara-esa25.

inlet flangeNW50drypump-ebara-esa25

Read on drypump-ebara-esa25.

mass240 kgdrypump-ebara-esa25

Read on drypump-ebara-esa25.

noise level63drypump-ebara-esa25

Read on drypump-ebara-esa25.

pumping speed nominal2500 L/min @ 50 Hz, 3000 L/min @ 60 Hz L/mindrypump-ebara-esa25

Read on drypump-ebara-esa25 p. 9. Served to the builder as 50 l/s, read from 3000 L/min. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: l/min to l/s, exact factor 1/60.

purge gas required17 - 20 Pa m3/sdrypump-ebara-esa25

Read on drypump-ebara-esa25.

ultimate pressure5.3/4.0 Padrypump-ebara-esa25

Read on drypump-ebara-esa25.

iH16045.8 l/sNominal displacement speed, down to 1.0e-2 mbardrypump-edwards-ih-1800+7 parameters

Edwards, multistage roots.

ambient temp range5 to 40 °Cdrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

inlet flangeISO63drypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

mass244 kgdrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

max inlet pressure continuousAtmosphericdrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

noise level<64 dB(A)drypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

pumping speed nominal165 m3 h-1drypump-edwards-ih-1800

Read on drypump-edwards-ih-1800. Served to the builder as 45.8 l/s, read from 165 m3 h-1. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: m3/h to l/s, exact factor 1/3.6.

ultimate pressure1x10-2 mbar, shaft seal purge onlydrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

A 20444.4 l/sNominal displacement speed, down to 2.0e-1 mbardrypump-pfeiffer-a4-series+11 parameters

Pfeiffer Vacuum, multistage roots.

ambient temp range5-40 °Cdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

corrosive variantH, Xdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

exhaust pressure max1200 hPadrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

inlet flangeDN 50 ISO-KFdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

mass250 kgdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

noise level< 65 dB(A)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

power max3.5 kWdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

pumping speed nominal130/160 m3/hdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series. Served to the builder as 44.4 l/s, read from 160 m3/h. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: m3/h to l/s, exact factor 1/3.6.

purge gas requiredN2 purge flow 10 to120 slmdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

temperature controlledyesdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

ultimate pressurerestated in a second unit, 9.091x apart2 ·10-1/2.2·10-2 hPa (without N2 purge)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

A 12430.6 l/sNominal displacement speed, down to 5.0e-2 mbardrypump-pfeiffer-a4-series+10 parameters

Pfeiffer Vacuum, multistage roots.

ambient temp range5-40 °Cdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

corrosive variantHdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

exhaust pressure max1200 hPadrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

inlet flangeDN 50 ISO-KFdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

mass250 kgdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

noise level< 65 dB(A)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

pumping speed nominal95/110 m3/hdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series. Served to the builder as 30.6 l/s, read from 110 m3/h. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: m3/h to l/s, exact factor 1/3.6.

purge gas requiredN2 purge flow 10 to 120 slmdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

temperature controlledyesdrypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

ultimate pressurerestated in a second unit, 2.5x apart5 ·10-2/2·10-2 hPa (without N2 purge)drypump-pfeiffer-a4-series

Read on drypump-pfeiffer-a4-series.

EV-S2027.8 l/sNominal displacement speeddrypump-ebara-ev-s+7 parameters

Ebara Corporation, multistage roots.

ambient temp rangenot exceeding 30°Cdrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

corrosive variantNdrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

inlet flangeNW50drypump-ebara-ev-s

Read on drypump-ebara-ev-s.

mass60 kgdrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

power max2.2 kWdrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

pumping speed nominal1670 L/mindrypump-ebara-ev-s

Read on drypump-ebara-ev-s. Served to the builder as 27.8 l/s, read from 1670 L/min. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: l/min to l/s, exact factor 1/60.

ultimate pressure3.0 Padrypump-ebara-ev-s

Read on drypump-ebara-ev-s.

iH8023.9 l/sNominal displacement speed, down to 3.0e-2 mbardrypump-edwards-ih-1800+8 parameters

Edwards, multistage roots.

ambient temp range5 to 40 °Cdrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

inlet flangeISO63drypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

mass240 kgdrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

max inlet pressure continuousAtmosphericdrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

noise level< 64 dB(A)drypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

pumping speed nominal86 m3 h-1 @ 50 Hz m3 h-1drypump-edwards-ih-1800

Read on drypump-edwards-ih-1800 p. 7. Served to the builder as 23.9 l/s, read from 86 m3 h-1. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: m3/h to l/s, exact factor 1/3.6.

stages5drypump-edwards-ih

Read on drypump-edwards-ih.

ultimate pressurerestated in a second unit, 3x apart3 x 10-2/ 1 x 10-2 mbar (50 Hz / 60 Hz), shaft seal purge onlydrypump-edwards-ih-1800

Read on drypump-edwards-ih-1800.

iQDP8022.2 l/sNominal displacement speed, down to 3.0e-2 mbardrypump-edwards-iqdp+8 parameters

Edwards, multistage roots.

ambient temp range5 to 40 oCdrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

inlet flangeISO63 bolteddrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

mass216 kgdrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

max inlet pressure continuous1 x 103 mbar (1 x 105 Pa)drypump-edwards-iqdp

Read on drypump-edwards-iqdp.

noise level< 70 dB(A)drypump-edwards-iqdp

Read on drypump-edwards-iqdp.

pumping speed nominal80 m3 h-1drypump-edwards-iqdp

Read on drypump-edwards-iqdp. Served to the builder as 22.2 l/s, read from 80 m3 h-1. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: m3/h to l/s, exact factor 1/3.6.

stages4drypump-edwards-iqdp

Read on drypump-edwards-iqdp.

ultimate pressure3 x 10-2 mbar (3 Pa), 50 Hz, shaft-seals purge onlydrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

A10S20 l/sNominal displacement speeddrypump-ebara-a-series-rev3b+3 parameters

Ebara Corporation, multistage roots.

inlet flangeNW40drypump-ebara-a-series-rev3b

Read on drypump-ebara-a-series-rev3b.

pumping speed nominal1000 L/min @ 50 Hz, 1200 L/min @ 60 Hz L/mindrypump-ebara-a-series-rev3b

Read on drypump-ebara-a-series-rev3b p. 6. Served to the builder as 20 l/s, read from 1200 L/min. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: l/min to l/s, exact factor 1/60.

ultimate pressure5.3 / 4.0 Padrypump-ebara-a-series-rev3b

Read on drypump-ebara-a-series-rev3b.

iL7019.4 l/sNominal displacement speed, down to 5.0e-2 mbardrypump-edwards-il70-il600+8 parameters

Edwards, multistage roots.

ambient temp range5 to 40 oCdrypump-edwards-il70-il600

Read on drypump-edwards-il70-il600.

exhaust pressure max3 p.s.i. (0.207 bar, 2.07 x 104Pa)drypump-edwards-il70-il600

Read on drypump-edwards-il70-il600.

inlet flangeISO63 bolteddrypump-edwards-il70-il600

Read on drypump-edwards-il70-il600.

mass230 kgdrypump-edwards-il70-il600

Read on drypump-edwards-il70-il600.

noise level< 62 dB(A)drypump-edwards-il70-il600

Read on drypump-edwards-il70-il600.

pumping speed nominal70 m3h-1drypump-edwards-il70-il600

Read on drypump-edwards-il70-il600. Served to the builder as 19.4 l/s, read from 70 m3h-1. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: m3/h to l/s, exact factor 1/3.6.

stages5drypump-edwards-il70-il600

Read on drypump-edwards-il70-il600.

ultimate pressurestated as a bound< 5 x 10-2 mbar (< 5 Pa),drypump-edwards-il70-il600

Read on drypump-edwards-il70-il600.

A07V14 l/sNominal displacement speeddrypump-ebara-a-series-rev3b+3 parameters

Ebara Corporation, multistage roots.

inlet flangeNW40drypump-ebara-a-series-rev3b

Read on drypump-ebara-a-series-rev3b.

pumping speed nominal700 L/min @ 50 Hz, 840 L/min @ 60 Hz L/mindrypump-ebara-a-series-rev3b

Read on drypump-ebara-a-series-rev3b p. 6. Served to the builder as 14 l/s, read from 840 L/min. Export rule: published nominal displacement speed, species not stated by the manufacturer, multi-regime value, 60 Hz bound selected by export (US mains), the base keeps every regime. Conversion: l/min to l/s, exact factor 1/60.

ultimate pressure1.1 / 1.0 Padrypump-ebara-a-series-rev3b

Read on drypump-ebara-a-series-rev3b.

iQDP4012.2 l/sNominal displacement speed, down to 5.0e-2 mbardrypump-edwards-iqdp+8 parameters

Edwards, multistage roots.

ambient temp range5 to 40 oCdrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

inlet flangeISO40 bolteddrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

mass186 kgdrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

max inlet pressure continuous1 x 103 mbar (1 x 105 Pa)drypump-edwards-iqdp

Read on drypump-edwards-iqdp.

noise level< 70 dB(A)drypump-edwards-iqdp

Read on drypump-edwards-iqdp.

pumping speed nominal44 m3 h-1drypump-edwards-iqdp

Read on drypump-edwards-iqdp. Served to the builder as 12.2 l/s, read from 44 m3 h-1. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: m3/h to l/s, exact factor 1/3.6.

stages4drypump-edwards-iqdp

Read on drypump-edwards-iqdp.

ultimate pressure5 x 10-2 mbar (5 Pa), 50 Hz, shaft-seals purge onlydrypump-edwards-iqdp

Read on drypump-edwards-iqdp.

EV-A0610 l/sNominal displacement speeddrypump-ebara-ev-a06+8 parameters

Ebara Corporation, multistage roots.

ambient temp range15 to 30 deg. Cdrypump-ebara-ev-a06

Read on drypump-ebara-ev-a06.

exhaust pressure max3 kPa or lessdrypump-ebara-ev-a06

Read on drypump-ebara-ev-a06.

inlet flangeNW40 (Quick Flange)drypump-ebara-ev-a06

Read on drypump-ebara-ev-a06.

massApprox. 54 kgdrypump-ebara-ev-a06

Read on drypump-ebara-ev-a06.

max inlet pressure continuousAtmospheric pressuredrypump-ebara-ev-a06

Read on drypump-ebara-ev-a06.

pumping speed nominal600 L/mindrypump-ebara-ev-a06

Read on drypump-ebara-ev-a06. Served to the builder as 10 l/s, read from 600 L/min. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: l/min to l/s, exact factor 1/60.

service intervalEvery 3 yearsdrypump-ebara-ev-a06

Read on drypump-ebara-ev-a06.

ultimate pressure1.0 Padrypump-ebara-ev-a06

Read on drypump-ebara-ev-a06.

EV-A034.2 l/sNominal displacement speeddrypump-ebara-ev-a03+8 parameters

Ebara Corporation, multistage roots.

ambient temp range15 to 30 deg. Cdrypump-ebara-ev-a03

Read on drypump-ebara-ev-a03.

exhaust pressure max3 kPa or lessdrypump-ebara-ev-a03

Read on drypump-ebara-ev-a03.

inlet flangeNW25 (Quick Flange)drypump-ebara-ev-a03

Read on drypump-ebara-ev-a03.

massApprox. 23 kgdrypump-ebara-ev-a03

Read on drypump-ebara-ev-a03.

max inlet pressure continuousAtmospheric pressuredrypump-ebara-ev-a03

Read on drypump-ebara-ev-a03.

pumping speed nominal250 L/mindrypump-ebara-ev-a03

Read on drypump-ebara-ev-a03. Served to the builder as 4.2 l/s, read from 250 L/min. Export rule: published nominal displacement speed, species not stated by the manufacturer, single published value, no regime to choose. Conversion: l/min to l/s, exact factor 1/60.

service intervalEvery 3 yearsdrypump-ebara-ev-a03

Read on drypump-ebara-ev-a03.

ultimate pressure1.0 Padrypump-ebara-ev-a03

Read on drypump-ebara-ev-a03.

4 models the base carries no speed and no ultimate for

They are in the corpus and they are named here. What is missing is a published value to judge them on, which is not the same as a model that fails.

ESR200WN Ebara Corporation 7 parameters
ESR20N Ebara Corporation 7 parameters
ESR80WN Ebara Corporation 7 parameters
EV-A10 Ebara Corporation 0 parameters

The 15 documents this family reads

drypump-ebara-a-series-rev3b Doc. No. 7313-L4602B Rev. 3B INSTRUCTION MANUAL MULTI-STAGE DRY VACUUM PUMP A70W (A70W-S, A70W-C) A30W (A30W-S, A30W-C) A25S (A25S-S) Ebara Corporation https://www.ptb-sales.com/manuals/ebara/a-series-rev3b.pdf
drypump-ebara-esa200w ESA200_CSN_2_E_Rev. 0 INSTRUCTION MANUAL MULTI-STAGE DRY VACUUM PUMP MODEL ESA200W CE / SEMI / NRTL MODEL 200-220V(50/60Hz) Caution: Ebara Corporation https://www.ptb-sales.com/manuals/ebara/esa200w.pdf
drypump-ebara-esa25 ESA25_CSN_D_E_Rev.0 INSTRUCTION MANUAL MULTI-STAGE DRY VACUUM PUMP MODEL ESA25-D CE / SEMI / NRTL MODEL 200V(50Hz),200-220V(60Hz) Ebara Corporation https://www.ptb-sales.com/manuals/ebara/esa25.pdf
drypump-ebara-esa300w ESA300_STD_B_E_Rev.0 INSTRUCTION MANUAL MULTI-STAGE DRY VACUUM PUMP MODEL ESA300W MODEL ESA300W-H STANDARD MODEL 200V（50Hz）, 200-220V（60Hz） Ebara Corporation https://www.ptb-sales.com/manuals/ebara/esa300w.pdf
drypump-ebara-esa500w ESA500_STD_B_E_Rev.0 INSTRUCTION MANUAL MULTI-STAGE DRY VACUUM PUMP MODEL ESA500W STANDARD MODEL 200V（50Hz）, 200-220V（60Hz） 440V（50Hz）, 400-480V（60Hz） Ebara Corporation https://www.ptb-sales.com/manuals/ebara/esa500w.pdf
drypump-ebara-esa70w ESA70_STD_2_E_Rev.0 INSTRUCTION MANUAL MULTI-STAGE DRY VACUUM PUMP MODEL ESA70W MODEL ESA70WN STANDARD MODEL 200V（50Hz）、200-220V（60Hz） Ebara Corporation https://www.ptb-sales.com/manuals/ebara/esa70w.pdf
drypump-ebara-esr ESR-N_STD_2_E_Rev.0 INSTRUCTION MANUAL MULTI-STAGE DRY VACUUM PUMP MODEL ESR20N MODEL ESR80WN MODEL ESR200WN STANDARD MODEL 200-220V（50/60Hz） Ebara Corporation https://www.ptb-sales.com/manuals/ebara/esr.pdf
drypump-ebara-ev-a03 EV-A Series DRY VACUUM PUMP APPLICABLE TYPE EV-A03 INSTRUCTION MANUAL EBARA CORPORATION PM10U P.3 Ebara Corporation https://www.ptb-sales.com/manuals/ebara/ev-a03.pdf
drypump-ebara-ev-a06 EV-A Series DRY VACUUM PUMP APPLICABLE TYPE EV-A06 INSTRUCTION MANUAL EBARA CORPORATION PM10U P.3 HANDLING OF MANUAL This instruction manual describes installation, operation, and maintenance about th Ebara Corporation https://www.ptb-sales.com/manuals/ebara/ev-a06.pdf
drypump-ebara-ev-s Doc.No. 7331-A95272 Rev. 1B INSTRUCTION MANUAL MULTI-STAGE DRY VACUUM PUMP EV-S Series (for 400V) EV-S20 EV-S50 EV-S100 EV-S200 ! CAUTION Ebara Corporation https://www.ptb-sales.com/manuals/ebara/ev-s.pdf
drypump-edwards-ih A533-50-880 Instruction Manual Issue D iH Dry Pumping Systems Manor Royal, Crawley, West Sussex, RH10 9LW, UK Telephone: +44 (0) 1293 528844 Fax: +44 (0) 1293 533453 Edwards https://www.ptb-sales.com/manuals/edwards/ih.pdf
drypump-edwards-ih-1800 A590-00-880 Issue D Original Instruction Manual iH Dry Pumping Systems Description Item Number iH80 A590-00-xxx iH160 A590-10-xxx Edwards https://www.ptb-sales.com/manuals/edwards/ih-1800.pdf
drypump-edwards-il70-il600 A533-71-880 Issue E Instruction Manual iL Dry Pumping Systems Manor Royal, Crawley, West Sussex, RH10 9LW, UK Telephone: +44 (0) 1293 528844 Fax: +44 (0) 1293 533453 Edwards https://www.ptb-sales.com/manuals/edwards/il70-il600.pdf
drypump-edwards-iqdp A532-40-880 Issue K Instruction Manual iQ Dry Pumping System Manor Royal, Crawley, West Sussex, RH10 9LW, UK Telephone: +44 (0) 1293 528844 Fax: +44 (0) 1293 533453 Edwards https://www.ptb-sales.com/manuals/edwards/iqdp.pdf
drypump-pfeiffer-a4-series OPERATING INSTRUCTIONS EN Translation of the original instructions A4 SERIES Multi-stage Roots pump for harsh applications 1 About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pfeiffer Vacuum https://www.ptb-sales.com/manuals/pfeiffer/a4-series.pdf