Display only. Every formula on this site works in its own canonical unit, and the
conversion happens where the number is written. The choice lives in this browser and in the address,
with no account.
Refractories · Workhorse
Rhenium and W-Re / Mo-Re alloys
W-Revalues describe: W-25Re
Vacuum electronics & X-ray sources
Why it wins
Rhenium buys ductility and thermal-fatigue resistance in refractories: W-Re focal tracks resist crazing on rotating anodes, W-Re wires make C-type thermocouples to 2300 C.
Why not the alternative
Pure tungsten tracks craze early and the spectrum drifts; pure Mo joints crack.
Watch out
Cost: rhenium is one of the rarest stable elements.
Properties
The values below are candidate: compiled from the sources named, not yet individually validated.
Provisional provenance: Plansee refractory metal and alloy data.
Wet cleaning
Recipe
degrease, DI rinse, hydrogen fire
Forbidden
oxidising conditions hot: Re₂O₇ is volatile and toxic
Limit
oxide volatility, not cleanliness
Vacuum and outgassing
Outgassing, unbaked (10 h)
1×10⁻⁹ mbar·L/s/cm²
Outgassing, baked
1×10⁻¹² mbar·L/s/cm²
Vapour pressure
negligible below 2200 °C
Temperature
Bake, assembled
450 °C
Vacuum degas
1500 °C
Braze / H2 firing
1800 °C
Metallurgical limit
no DBTT problem: that is the point of the rhenium
Thermal
CTE
4.8 ppm/K
Thermal conductivity
70–100 W/m·K
Specific heat
150 J/kg·K
Emissivity
0.1
Melting / softening
3000–3180 °C
Mechanical
Strength
1000+ ys MPa
Tensile
1200–1800 MPa
Elongation
10–20 %
Young's modulus
400–460 GPa
Hardness
400–500 HV
Density
19.7 (W-25Re) g/cm3
Electrical and magnetic
Relative permeability
~1.0
Resistivity
25–30
Engineering
Corrosion
inert in vacuum
Joining
brazed; ductile enough to draw as wire
Process notes
the rhenium ductilising effect buys the workability